In-depth articles, up-close photography, and detailed illustrations in every issue.
Corrugated Stainless Steel Tubing, or CSST, is a flexible tubing used to supply natural gas and propane in buildings. Compression fittings are used to make transitions between pipes. Here’s how they work:
First, use a steel tubing cutter to cut the pipe to length along a valley in the corrugation.
Then, for three-part fittings like the Home-Flex fitting seen first in the video above, count three valleys in and score the tubing’s jacket with a utility knife. Make another score from that mark to the end, and remove the jacket from the end, exposing two valleys.
Next, slide the nut onto the tubing with the threads facing toward the end being connected. Then slide the retainer ring over the first valley, and pinch it closed using tongue-and-groove pliers (such as Channellocks), applying gentle pressure all around the ring to help maintain its round shape and lock it into the valley.
Finally, insert the fitting and thread the nut by hand. It’s important to spin the nut, not the fitting (typically, the fitting will already be installed on the pipe or tubing it’s joining, so spinning it would loosen that connection). When it’s hand-tight, use a wrench to prevent the fitting from spinning and use another wrench to tighten the nut to complete the connection.
For fittings with multiple rings like this one from Pro-Flex, count 5 valleys in, score the jacket, and remove it to expose four valleys.
Then slide the nut over the tubing with the threads facing the end. Next, open and install the retainer ring in the fourth valley and pinch it closed. Then install the metal washer, followed by the rubber O-ring, which gets snugged up to the metal washer.
Finally, thread the nut onto the fitting—again, only spin the nut—until it’s hand-tight. To complete the connection, use a wrench to prevent the fitting from spinning and use another wrench to tighten the nut a quarter-turn to compress the fitting.
These fittings are easy to install, but this work should be done by a certified installer. Certification training for your particular brand may be available online through the manufacturer.
Tankless Water Heater Installation Quirks and Tips – Mastered in a Minute: Consider codes and appliance requirements when installing tankless natural gas and propane water heaters.
How to Install a Tankless Water Heater – Pluses include endless hot water and a compact design, but the installation means a lot of pipes in a small space.
Backdraft Protection for Combustion Appliances
Sign up for eletters today and get the latest how-to from Fine Homebuilding, plus special offers.
Get home building tips, offers, and expert advice in your inbox
Pex Universe states that the yellow type CSST is out dated and should not be used because it does not conform to a more secure arc resistant covering. Pro Flex has gone to a black jacket over the tubing and their fittings using a rubber washer are more secure than the home flex method (this is a Home Depot product).
With a goal of getting tools into the hands of more women, this new web service enables people to set up consultation calls with women and nonbinary pros on a variety of home-construction projects.
Get an overview of the process of creating a traditional-style fireplace that burns well and meets current building codes from experienced mason Mike Mehaffey.
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Get home building tips, offers, and expert advice in your inbox
Get home building tips, offers, and expert advice in your inbox
© 2022 The Taunton Press, Inc. All rights reserved.
Get home building tips, offers, and expert advice in your inbox
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 76%
Get complete site access to expert advice, how-to videos, Code Check, and more, plus the print magazine.
Already a member? Log in