This specification covers requirements and test methods for materials, workmanship, dimensions, perforations, pipe stiffness, elongation, joint separation resistance, quality of extruded polyethylene, brittleness, bond, and marking of corrugated polyethylene (PE) pipe and fittings. This specification covers tubularly extruded, spirally laminated, and rotationally molded corrugated polyethylene pipe. Corrugated PE pipe and fittings are intended for underground applications where soil provides support to their flexible walls. Their major use is to collect or convey drainage water, or both. The following tests shall be performed: dimensions and tolerances; pipe stiffness; elongation; pipe stiffness while elongated; joint-separation test; and brittleness. This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This specification covers requirements and test methods for materials, workmanship, dimensions, perforations, pipe stiffness, elongation, joint separation resistance, quality of extruded polyethylene, brittleness, bond, and marking of corrugated polyethylene (PE) pipe and fittings. It covers nominal sizes 3 in. (76 mm), 4 in. (102 mm), 5 in. (127 mm) 6 in. (152 mm), 8 in. (203 mm), 10 in. (254 mm), 12 in. (305 mm), 15 in. (381 mm), 18 in. (457 mm), and 24 in. (610 mm). 1.2 This specification covers tubularly extruded, spirally laminated, and rotationally molded corrugated polyethylene pipe. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test method portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2. Referenced Documents (purchase separately) ASTM Standards D618 Practice for Conditioning Plastics for Testing D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading D2444 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) D3350 Specification for Polyethylene Plastics Pipe and Fittings Materials F405 Specification for Corrugated Polyethylene (PE) Pipe and Fittings F412 Terminology Relating to Plastic Piping Systems F449 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control Federal Standard Fed.Std.No.123 Marking for Shipment (Civil Agencies) Military Standard MIL-STD-129 Marking for Shipment and Storage Index Terms corrugated; perforated; polyethylene; underdrain; Corrugated polyethylene (PE) tube--specifications; Polyethylene (PE) fittings--specifications; Polyethylene (PE) tube--specifications ICS Code ICS Number Code 23.040.20 (Plastic pipes); 23.040.45 (Plastic fittings) DOI: 10.1520/F0667-12 ASTM International is a member of CrossRef.

Geomembrane HDPE Inground Pond Liners for Biogas Digester Project in Thailand

BPM has been committed to the development and production of high-quality geomembrane in ground pond lines since its foundation in 2007. BPM HDPE eomembrane pond liner series products include smooth geomembrane, rough geomembrane, composite geomembrane and other products. As the governments pays more and more attention to environmental protection, more and more large-scale farms have begun to build supporting environmental protection facilities, such as oxidation ponds, biogas digesters and other projects, which...

Molecor brings water to the Bulgarian city of Pernik after months of severe drought

Molecor has recently completed a major project: that of supplying the Bulgarian city of Pernik with drinking water. This city suffered extreme drought since November 2019. The absence of rain and the very low water level in the Studena dam, with 25 million cubic meters of capacity, threatened to leave a population of 100,000 people without potable water. In addition to the scarcity of flow from the Struma river that supplies the Studena dam, there were also enormous losses of water from the current installed...

Exhibit the Big 5 - Dubai 2018

For the ninth time, company Vargon has exhibited in the largest Middle East construction fair – „The Big 5“ fair. The fair was held in exhibition space Dubai World Trade Center in the period of 26. – 29. November 2018. in United Arab Emirates, city of the future Dubai. Along with the fair itself, many seminars, workshops, and conferences took place so the fair attracts large number of people from the construction world. Company Vargon has been the only exhibitor from Croatia this year...

Hiscan Pipeline Monitoring System Officially Launched

After several months of intensive beta testing with customers, GUTERMANN has now officially launched HISCAN, the technology that can be permanently installed for unmanned trunk main and transport pipeline monitoring. HISCAN consists of an extremely sensitive correlating hydrophone sensor that is directly installed on the pipe (either by tapping or by connecting it to a hydrant) and a solar-powered 3G gateway for the transmission of the data to the Gutermann Cloud. Like its little brother, the ZONESCAN 820 correlati...

Hong Kong and China Gas two new projects put into operation yesterday

Hong Kong China Gas Ma On Shan new project construction re - fruit. On November 7th, the second new gas pipeline prefabricated production line was invested and put into production at Fuma Zhilian Science and Technology Park. The same day, in the city of Fuma (Meishan Road) Science and Technology Park, Hong Kong China Gas Company to invest in the PE pipe Maanshan production base has also been successfully completed and put into production. Zhuojia Public Works (Maanshan) Co., Ltd. is jointly set up by Hong Kong...

No comments were found for ASTM F667 - 12 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings. Be the first to comment!

Environmental XPRT is a global environmental industry marketplace and information resource. Online product catalogs, news, articles, events, publications & more.

Environmental XPRT is part of XPRT Media All Rights Reserved. Terms Privacy

Our sites: Agriculture XPRT Energy XPRT Medical XPRT XPRT